FieldLink v6.9 Release Notes

FeildLink v6.9 (2023-11 v6.9.1) has been released and ready to install via Trimble Installation Manager (TIM). The newest version includes a patch to resolve issues that users had when they were running FieldLink Core as part of their GNSS workflow.

Please see the support article about installing updates via TIM if you need help updating FieldLink.
Trimble FieldLink Installation through Trimble Installation Manager

Here are some of the Key Features released as part of this new FieldLink Version

  • T10x (2024 tablet) Support
  • Disable Ri Autolock with Reflective Foil Targets
  • CSV/TXT/TFLX Imports at Project Creation
  • Create from Model: Center of a Circle over 3 points
  • Wall Penetration Improvement – Select/Extend Existing Line
  • Export Layer Structure when Exporting Points and Lines in DWG
  • Disable Auto Level when Scanning
  • Adjustable Tolerance Settings for Scan Refine Report
  • Export Colored Inspection Clouds
  • X7/X9 Gridline Setup
  • Format SD Card within FieldLink
  • GNSS Site Calibration and Residual Improvements
  • Fast vs High Precision GNSS Measurements
  • RTX Local Setup – GNSS
  • R780 timed/subscription configuration support
  • UTM/Polar Coordinate Support for Coordinate System Manager (GNSS)
  • Scan Inspection Feature – Positive and Negative Values

Version 6.8 will work with the following Firmware, Controllers, Operating and Coordinate Systems:

  • RTS573, RTS655, RTS673 – Firmware: C10.12.8
  • RTS771, RTS773, RTS873 – Firmware: B3.12.8
  • Ri – Firmware: 3.2.281
  • SPS Series – Firmware: C10.12.8
  • RPT600 – Firmware: R1.1.33
  • R8s – Firmware: 5.61
  • SPS986 – Firmware: 6.21 (Package includes 5.61 & 6.21)
  • R780 – Firmware: 6.21 (Package includes 5.61 & 6.21)
  • X7 – Firmware: R2.5.100
  • X9 – Firmware: 1.0.3.0384
  • Trimble T100 (Windows OS updates ongoing via Microsoft)
  • DTR301Y 10.1” Tablet (Windows OS updates ongoing via Microsoft)
  • Trimble T10 (Windows OS updates ongoing via Microsoft)
    • Does not support X9
  • Trimble T10X (Windows OS updates ongoing via Microsoft)
  • Panasonic FZ-M1 (Windows OS updates ongoing via Microsoft)
    • No scan module support
    • Does not support X7 or X9
  • Trimble T10X (2024) (Windows OS updates ongoing via Microsoft)
    • FieldLink version v6.9 supports X7, X9, RTS, Ri, SPS986, R780
    • FieldLink versions v6.8 and older support X7, X9 and RTS
  • Windows 11 – only tested with T100 and PC.
  • Windows 10 (PC, T10, T10X, T100, and DTR301Y)
  • Coordinate System Manger Version: 3.9.16.0
  • Database Version: 107

With v6.3 and higher you will need to create a Project inside of FieldLink plus a new file format which is a TFLX file for the use in the point layout process or to collect scan data. If you have not already upgraded to v6.3, v6.4 or v6.5 and experienced this new workflow we suggest you reach out to your BuildingPoint Sales Representative or the support team to discuss the difference between this new process and the data creation process in FieldLink v6.2 and earlier.

To learn how to create a Project in FieldLink v6.9 please refer to the FieldLink v6.3 – Creating a Project and Importing Data article on the Knowledge Base.

The updated User Guide for this version of FieldLink can be downloaded as part of the install process using TIM.

To see an overview of the latest updates in FieldLink please review the attached release notes.

FieldLink v6.8 Release Notes

FeildLink v6.8 (2023-08 v6.8.0) has been released and ready to install via Trimble Installation Manager (TIM). Please see the support article about installing updates via TIM if you need help updating FieldLink.
Trimble Field Points Installation through Trimble Installation Manager

Here are some of the Key Features released as part of this new FieldLink Version

  • RTX Corrections
  • Resection – Automatically Turn to 3rd Point
  • Resection – Angle Only Setup
  • US Survey Feet Unit Support
  • Add Project Name in Daily Layout Summary
  • X9 Atmospheric Corrections Suppot
  • Trimble Connect Australia Region Support

Version 6.8 will work with the following Firmware, Controllers, and Operating Systems:

  • RTS573, RTS655, RTS673 – Firmware: C10.12.8
  • RTS771, RTS773, RTS873 – Firmware: B3.12.8
  • Ri – Firmware: 3.2.247
  • SPS Series – Firmware: C10.12.8
  • RPT600 – Firmware: R1.1.33
  • R8s – Firmware: 5.61
  • SPS986 – Firmware: 6.21 (Package includes 5.61 & 6.21)
  • R780 – Firmware: 6.21 (Package includes 5.61 & 6.21)
  • X7 – Firmware: R2.5.100
  • X9 – Firmware: 1.0.2.370
  • Trimble T100 (Windows OS updates ongoing via Microsoft)
  • DTR301Y 10.1” Tablet (Windows OS updates ongoing via Microsoft)
  • Trimble T10 (Windows OS updates ongoing via Microsoft)
    • Does not support X9
  • Trimble T10X (Windows OS updates ongoing via Microsoft)
  • Panasonic FZ-M1 (Windows OS updates ongoing via Microsoft)
    • No scan module support
    • Does not support X7 or X9
  • Windows 11 – only tested with T100 and PC.
  • Windows 10 (PC, T10, T10X, T100, and DTR301Y)

With v6.3 and higher you will need to create a Project inside of FieldLink plus a new file format which is a TFLX file for the use in the point layout process or to collect scan data. If you have not already upgraded to v6.3, v6.4 or v6.5 and experienced this new workflow we suggest you reach out to your BuildingPoint Sales Representative or the support team to discuss the difference between this new process and the data creation process in FieldLink v6.2 and earlier.

To learn how to create a Project in FieldLink v6.5 please refer to the FieldLink v6.3 – Creating a Project and Importing Data article on the Knowledge Base.

The updated User Guide for this version of FieldLink can be downloaded as part of the install process using TIM.

To see an overview of the latest updates in FieldLink please review the attached release notes.

FieldLink v6.7 Release Notes

FeildLink v6.7 (2023-05 v6.7.0) has been released and ready to install via Trimble Installation Manager (TIM). Please see the support article about installing updates via TIM if you need help updating FieldLink.
Trimble Field Points Installation through Trimble Installation Manager

Here are some of the Key Features released as part of this new FieldLink Version

  • Ability to create and store GNSS Base location
  • New crosshair while using vision with Ri
  • Laser plummet setup over known point with Ri
  • Change Ri Wifi and without without restarting instrument
  • Change/delete point and scan job name
  • New Ri exposure settings
  • HTML reports
  • Colored contours in surface analysis
  • X9 support in FieldLink
  • T10X hardware support
  • TFLx in Trimble Connect – Point names in separate layer to handle the visibility

Version 6.7 will work with the following Firmware, Controllers, and Operating Systems:

  • RTS573, RTS655, RTS673 – Firmware: C10.12.8
  • RTS771, RTS773, RTS873 – Firmware: B3.12.8
  • Ri – Firmware: 3.2.247
  • SPS Series – Firmware: C10.12.8
  • RPT600 – Firmware: R1.1.28
  • R8s – Firmware: 5.50
  • SPS986 – Firmware: 6.16 (Package includes 5.56 & 6.16)
  • R780 – Firmware: 6.16 (Package includes 5.56 & 6.16)
  • X7 – Firmware: R2.5.100.
  • X9 – Firmware: 1.0.1.0337 and newer
  • Trimble T100 (Windows OS updates ongoing via Microsoft)
  • DTR301Y 10.1” Tablet (Windows OS updates ongoing via Microsoft)
  • Trimble T10 (Windows OS updates ongoing via Microsoft)
  • Trimble T10X (Windows OS updates ongoing via Microsoft)
  • Panasonic FZ-M1 (Windows OS updates ongoing via Microsoft)
    • no scan module support
  • Windows 11 – only tested with T100 and PC.
  • Windows 10 (PC, T10, T10X, T100, and DTR301Y)

With v6.3 and higher you will need to create a Project inside of FieldLink plus a new file format which is a TFLX file for the use in the point layout process or to collect scan data. If you have not already upgraded to v6.3, v6.4 or v6.5 and experienced this new workflow we suggest you reach out to your BuildingPoint Sales Representative or the support team to discuss the difference between this new process and the data creation process in FieldLink v6.2 and earlier.

To learn how to create a Project in FieldLink v6.5 please refer to the FieldLink v6.3 – Creating a Project and Importing Data article on the Knowledge Base.

The updated User Guide for this version of FieldLink can be downloaded as part of the install process using TIM.

To see an overview of the latest updates in FieldLink please review the attached release notes.

FieldLink v6.6 Release Notes

FeildLink v6.6 (2023-02 v6.6.0) has been released and ready to install via Trimble Installation Manager (TIM). Please see the support article about installing updates via TIM if you need help updating FieldLink.
Trimble Field Points Installation through Trimble Installation Manager

Here are some of the Key Features released as part of this new FieldLink Version

  • Automatic creation of a Scan and Layout Job as part of a New Project
  • Nudge button for use with Trimble Vision capable hardware
  • For GNSS users, you will have the ability to select a coordination system and zone in FieldLink
  • For users that have the FieldLink Scan Module you will be able to create detailed area scans for selected areas after an initial low level scan. This allows for a higher level of data collection in certain areas only.
  • For Ri users, you will now be able to set up the unit using April Tags. For questions about this new workflow, please reach out to our support team.
  • For Ri users, you can now setup over a known location using an optical plummet tribrach.

With v6.3 and higher you will need to create a Project inside of FieldLink plus a new file format which is a TFLX file for the use in the point layout process or to collect scan data. If you have not already upgraded to v6.3, v6.4 or v6.5 and experienced this new workflow we suggest you reach out to your BuildingPoint Sales Representative or the support team to discuss the difference between this new process and the data creation process in FieldLink v6.2 and earlier.

To learn how to create a Project in FieldLink v6.5 please refer to the FieldLink v6.3 – Creating a Project and Importing Data article on the Knowledge Base.

The updated User Guide for this version of FieldLink can be downloaded as part of the install process using TIM.

To see an overview of the latest updates in FieldLink please review the attached release notes.

FieldLink v6.5 Release Notes

FeildLink v6.5 (2022-10 v6.5.0) has been released and ready to install via Trimble Installation Manager (TIM). Please see the support article about installing updates via TIM if you need help updating FieldLink.
Trimble Field Points Installation through Trimble Installation Manager

With v6.3 and higher you will need to create a Project inside of FieldLink plus a new file format which is a TFLX file for the use in the point layout process or to collect scan data. If you have not already upgraded to v6.3 or v6.4 and experienced this new workflow we suggest you reach out to your BuildingPoint Sales Representative or the support team to discuss the difference between this new process and the data creation process in FieldLink v6.2 and earlier.

To learn how to create a Project in FieldLink v6.5 please refer to the FieldLink v6.3 – Creating a Project and Importing Data article on the Knowledge Base.

The updated User Guide for this version of FieldLink can be downloaded as part of the install process using TIM.

To see an overview of the latest updates in FieldLink please review the attached release notes.

FieldLink v6.4 Release Notes

FeildLink v6.4 (2022-08 v6.4.0) has been released and ready to install via Trimble Installation Manager (TIM). Please see the support article about installing updates via TIM if you need help updating FieldLink.
Trimble Field Points Installation through Trimble Installation Manager

With v6.4 you will need to create a Project inside of FieldLink plus a new file format which is a TFLX file for the use in the point layout process or to collect scan data. If you have not already upgraded to v6.3 and experienced this new workflow we suggest you reach out to your BuildingPoint Sales Representative or the support team to discuss the difference between this new process and the data creation process in FieldLink v6.2 and earlier.

To learn how to create a Project in FieldLink v6.4 please refer to the FieldLink v6.3 – Creating a Project and Importing Data article on the Knowledge Base.

The updated User Guide for this version of FieldLink can be downloaded as part of the install process using TIM.

To see an overview of the latest updates in FieldLink please review the attached release notes.

FieldLink v6.1 Release Notes

FeildLink v6.1 has been released on 10/8/21 for install via Trimble Installation Manager (TIM). Please see the support article about installing updates via TIM if you need help updating FieldLink.
Trimble Field Points Installation through Trimble Installation Manager

The updated User Guide for this version of FieldLink can be downloaded as part of the install process using TIM.

To see an overview of the latest updates in FieldLink please review the attached release notes.

Install FieldLink Updates via TIM

FieldLink software base installs and updates are all handled through the Trimble Installation Manager (TIM) application.

TIM should already be installed on your Trimble Tablet but if you do not have it installed on your computer you can go to the link below to download TIM.
https://www.trimble.com/installationmanager

Select “TIM for Windows – Online” and run the installer.

The application will run in your system tray after it’s installed. You can also place a shortcut for the application on your desktop.

Updating FieldLink via TIM

Step 1: Launch TIM follow these instructions to install FieldLink onto your tablet or PC.Select the ‘Show all’ option.

Step 2: Select the ‘FieldLink’ button.

Step 3: Using the drop down carrot select the desired version of FieldLink. The latest version will always be displayed on top

Step 4: Toggling the check boxes, choose if you want some or all of the options.

Step 5: Once you have the appropriate selections click the ‘Install’ button.